

MAJOR REVIEW 

Year : 2019  Volume
: 31
 Issue : 3  Page : 191201 

Intraocular lens power calculation in 2019: The cutting edge
Prashob Mohan^{1}, Arup Chakrabarti^{2}
^{1} Department of Cornea and Refractive Surgery, Giridhar Eye Institute, Kochi, Kerala, India ^{2} Chakrabarti Eye Care Centre, Cataract and Glaucoma Services, Trivandrum, Kerala, India
Date of Web Publication  31Dec2019 
Correspondence Address: Dr. Prashob Mohan Giridhar Eye Institute, Kochi, Kerala India
Source of Support: None, Conflict of Interest: None  Check 
DOI: 10.4103/kjo.kjo_71_19
In today's world, with the developments in technology to measure ocular biometric parameters more accurately and the availability of sophisticated methods for intraocular lens (IOL) power calculation, cataract surgery has become no less than a refractive surgery. This along with free and easy access to information regarding the latest technology has heightened patient expectations. The demand for a spectaclefree life after cataract surgery is higher than ever. Newer advances in optical biometry, including sweptsource optical coherence tomography technology, supplemented by the availability of highly accurate IOL power calculation formulae including ones that use artificial intelligence have the potential to enable surgeons to achieve nearperfect outcomes in majority of their patients. To hit the bull's eye as far as target refraction is concerned, it is necessary to understand the benefits and limitations of currently available cutting edge technology and formulae and apply them to the cataract surgery practice.
Keywords: Biometry, formula, intraocular lens power, optical biometry, sweptsource optical coherence tomography
How to cite this article: Mohan P, Chakrabarti A. Intraocular lens power calculation in 2019: The cutting edge. Kerala J Ophthalmol 2019;31:191201 
Introduction   
Cataract surgery has come a long way since the first intraocular lens (IOL) was implanted by Sir Harold Ridley in 1949.^{[1]} In today's world, it is no longer sufficient to give better vision after cataract surgery. Easy access to information regarding the latest technology has created a demand for nearperfect visual outcomes. One of the most important determinants of the refractive outcome of cataract surgery is IOL power. This necessitates highly accurate calculation of IOL power.
There are two components to accurate IOL power calculation – precise biometry and accurate IOL power calculation formulae.
Biometry   
For more than 50 years, ultrasound was the only commercially available tool to measure ocular axial length. This changed in 1998 with the introduction of optical biometry which used infrared light to determine the axial length.^{[2]} Optical biometry has by and largely replaced ultrasound biometry as the technique of choice to measure axial length due to its obvious advantages [Table 1].
Disadvantages of optical biometry
 The cost of optical biometers is significantly more than ultrasound biometers ^{[9]}
 Dense cataracts and corneal opacities may preclude accurate axial length determination optical biometry.^{[10]} Immersion ultrasound biometry is preferred in such cases, as it is more repeatable due to lack of variable corneal compression.^{[11],[12]} Many of these difficulties have, however, been overcome with the advent of sweptsource optical coherence tomography (SSOCT) technology.^{[13]}
Optical biometry
Optical biometers available today use one of the following technologies:
 Partial coherence interferometry (PCI)
 Optical low coherence reflectometry (OLCR)
 SSOCT.
Partial coherence interferometry
Fercher and Roth developed this technology in 1986. PCI unlike ultrasound Ascan, uses infrared light. Tissue interfaces with differing refractive indices reflect this light. Interferometric techniques are then used to measure ocular distances.^{[14]}
To minimize the effect of longitudinal eye movements, a dual coaxial beam interferometer is used. Two beams of light are introduced into the eye. These beams have a mutual time delay equal to twice the arm length difference of the interferometer. Tissue interfaces reflect this light, and a PCI signal is produced. The light reflected off the anterior corneal surface and the retinal pigment epithelium are considered for measurement of axial length.^{[14]}
Examples of devices using this technology are the IOL Master 500 from Carl Zeiss, the ALScan from Nidek and Pentacam AXL from Oculus.
Optical lowcoherence reflectometry
OLCR uses the principle of a Michealson interferometer. Lowcoherence infrared light produced by a superluminescent diode is split into two beams by a coupler. One beam is introduced into the eye, and the other is directed toward a scanning reference mirror. Tissue interfaces reflect light. The interference pattern formed by the emitted and reflected light, which travels coaxially, is detected by a detector. The exact location from which the light was reflected from within the eye is determined by scanning the reference beam.^{[15]}
OLCR is being used in the following biometers – Lenstar LS900 (HaagStreit) and Aladdin (Topcon) and Galilei G6 (Zeimer).
Sweptsource optical coherence tomography
SSOCT based machines do not use a superluminescent diode. Instead, they use a swift sweeping laser as the source. The reference mirror is kept static. The captured interference signal then undergoes Fourier transformation.^{[16],[17]}
The IOL Master 700 (Carl Zeiss) and Argos (Movu) and the Eyestar 900 (HaagStreit) are the various devices which make use of this principle.
Optical biometers IOL Master 500
The first optical biometer that was commercially available was the IOL master from Carl Zeiss [Figure 1].
The IOL Master 500 uses a 780 nm infrared laser as source. It functions on the principle of PCI. It can measure axial length to within 0.02 mm accuracy which is five times more than that of an immersion ultrasound biometer.^{[18]}
IOL Aconstants used in optical biometry are different from that used for ultrasound biometry. On the User Group for Laser Interference Biometry website, the optimized Aconstants for most commonly used IOLs are available.
Keratometry (K), anterior chamber depth (ACD), and horizontal whitetowhite (WTW) distance are also measured by the IOL Master 500 in addition to axial length (AL). A more accurate telecentric method is used to measure keratometry.^{[19]} A projected slit is used to measure ACD.
The formulae available onboard the IOL Master 500 are SRK II, SRKT, Haigis, Hoffer Q, Holladay1, Haigis–L, and Holladay 2.
Data can be exported via Universal Serial Bus (USB). There is also a facility to export data via USB toa computerassisted surgery system called the Callisto Eye, that can display an overlay in the microscope eyepiece during cataract surgery. The IOL Master 500 may be unable to measure axial length accurately in eyes with dense corneal or lenticular opacity. To a certain extent, the accuracy of scans in opaque media was improved by the introduction of a technique where the average of multiple scans was taken.^{[20]}
ALscan
Nidek's ALScan [Figure 2] is a PCIbased biometer. It can measure axial length, ACD, WTW, pupil size, and central corneal thickness (CCT). It uses Scheimpflug imaging to measure ACD and CCT. Rings reflected off anterior corneal surface are used to perform keratometry and corneal topography. The ALScan also measures corneal aberrations. The ALScan can also capture toric lens assist images for digitally marking the axis of toric IOL placement. The ALScan also comes with an ultrasound pachymeter and Ascan.^{[21]}
All popular IOL calculation formulae are incorporated into this biometer.
PentacamAXL
The Oculus PentacamAXL [Figure 3] is a combination of an elevation based tomographer and a PCI based optical biometer. A rotating Scheimpflug camera performs corneal tomography and PCI technology is used to determine axial length. It also measures CCT and WTW. The advantage that the Pentacam AXL has is the ability to measure posterior corneal astigmatism that gives it an edge as far as toric IOL planning is concerned. It is also particularly helpful in calculating IOL power in eyes post corneal refractive surgery. Wavefront analysis functions are also incorporated in the device.
The device has the most popular IOL power calculation formulae on board.
Lenstar LS900
The Lenstar LS900 [Figure 4] uses OLCR technology to measure ocular distances. It was one of the first devices that could measure lens thickness (LT). A lowcoherent beam of light of 820 nm wavelength produced from a superluminescent diode is used to measure axial length, ACD, and LT.
Thirtytwo points placed close to each other are used to perform a dualzone keratometry. The TCone is a reflectionbased topographer that comes as an attachment to the Pro Version of the Lenstar LS900. It can perform anterior corneal topography in a 6 mm zone and is particularly useful in toric IOL planning.
ACD is measured using OLCR as opposed to the slit beam used in IOL Master 500. Horizontal WTW and pupil diameter are the other parameters measured by the Lenstar LS900.
All modern IOL calculation formulae including Holladay IOL Consultant Professional, the Barrett Suite, Hillradial basis function (RBF), Masket, Modified Masket, and Shammas Nohistory are available on board the Lenstar LS900. Through an additional software interface, Okulix and Olsen formulae are also available.
Aladdin HW3.0
The Alladdin HW 3.0 from Topcon [Figure 5] is a combination of a reflectionbased topographer and an optical biometer.
Keratometry can be performed at 3, 5, and 7 mm zones. 24 placido rings are used to perform anterior corneal topography. The device can also assess mesopicpupillometry and lens centration. Higher order aberrations can be evaluated using Zernicke wavefront analysis.
Axial length is calculated using OLCR technology.
Most popular spherical and toric IOL power calculation formulae are available on board the Alladdin HW 3.0.
AL, ACD, and keratometry measured with the IOL Master 500 and the Aladdin HW 3.0 have good agreement with each other.^{[22]}
Galilei G6
Zeimer's Galilei G6 [Figure 6] is a dualScheimpflug camera and placido disk corneal topographer combined with an OLCR biometer. The device provides corneal tomography and threedimensional anterior chamber analysis along with higherorder aberrations and total corneal astigmatism in addition to AL, CCT, ACD, LT, and WTW measurements. Because it measures posterior corneal astigmatism, it is particularly useful in calculating IOL power in eyes that have undergone corneal refractive surgery. The Galilei G6 also provides access to ray tracing IOL power calculation formulae such as Okulix and PhacoOptics.
IOL Master 700
The IOL Master 700 from Carl Zeiss [Figure 7] is one of the latest optical biometers to be launched. The device is based on SSOCT technology.
It does rapid scanning at a speed of 2000 scans per second. The device can image the various ocular structures using OCT. This helps in the detection of abnormalities such as lens tilt, posterior polar cataracts, and macular pathologies to some extent. The OCT image of the pit of the fovea allows the operator to ascertain that the fixation is central. The IOL Master 700 measures the curvature anterior corneal surface using telecentric keratometry. Further, it can also measure posterior corneal curvature with the help of SSOCT technology in order to give a new parameter called total keratometry (TK). Measurement is also possible in eyes with dense cataracts and other media opacities, in which OLCR or PCIbased optical biometry was not possible.^{[23],[24]}
All the modern IOL power calculation formulae including the Barret suite consisting of the Barret Universal 2, the Barrett True K, and the Barrett Toric are available on board the IOL Master 700. In addition, two formulae, namely the Barrett TK Universal II and the Barrett TK Toric, which utilize TK are available.
The IOL Master 700 also captures a highresolution image of the eye and can link with the Callisto eye system for markerless toric IOL implantation.
Argos
Argos from Movu [Figure 8] uses SSOCT technology to perform ocular biometry. Keratometry, AL, CCT, ACD, WTW, LT, CCT, and pupil size can be measured using the Argos. SSOCT technology enables measurement of AL through dense cataracts. IT is enabled with an analyze mode that enables operators to ascertain the accuracy of measurements.
Like the IOL Master 700, the argos is capable of making measurements through dense cataracts. The analyze mode allows technicians to check the plausibility of measurements. All popular IOL power calculation formulae are incorporated in the device.
OA2000
Tomey's OA 2000 [Figure 9] combines a placido discbased topographer with an SSOCT based biometer. It measure keratometry, CCT, ACD, AL, LT, WTW, pupillometry, and corneal topography.
All modern IOL power calculation formulae including ones based on ray tracing are available on board.
Eyestar 900
Another SSOCT based device currently in the final stage of development is the HaagStreit Eyestar 900 [Figure 10]. It is not commercially available yet. HaagStreit claims that it can claims to provide biometric analysis of the entire eye from the cornea to the retina, including elevationbased corneal topography.
Intraoperative aberrometry
Wavefront aberrometry can be performed during cataract surgery using certain instruments. These intraoperative aberrometers can make aphakic and pseudophakic refractive measurements. These can be attached to the surgical microscope and can provide realtime information on axis of placement of a toric IOL, position of limbal relaxing incisions, etc., via the oculars of the microscope. Intraoperative aberrometers are particularly beneficial in is toric, multifocal, and accommodative IOL implantation and also in cataract surgery in eyes postcorneal refractive surgery.^{[25],[26]} The two commercially available intraoperative aberrometers are: the Optiwave Refractive Analysis (ORA) and the Holos IntraOp.
Intraocular lens power calculation formulae
There are various cutting edge tools available today that can accurately measure ocular biometric parameters. However, all this would amount to nothing in the absence of an IOL calculation formula that can accurately predict postoperative refractive outcome. IOL power calculation formulae have also evolved with the times. A number of formulae which were relevant two decades ago are no more recommended for routine IOL power calculation.
Classification
A schema for classifying the various IOL power calculation formulae is given in [Table 2].^{[27]}
Historical/refractionbased formulae
In this method, a fixed power is added to the patient's refraction. It has become obsolete.
Regression formulae
Statistical data acquired previously are solely relied upon to calculate IOL power. These formulae do not take into account the optics of the eye.
Vergence formulae
Vergence formulae arrive at an IOL power using Gaussian optics. Gaussian optics makes an assumption that image vergence = object vergence + lens vergence. Most modernday IOL power calculation formulae are based on the following equation formulated by Fyodorov.
IOL power = (1336/[ALELP]) – (1336/[1336/{1000/([1000/DPostRx] – V) + K} – ELP])
where K is Net corneal power, AL is Axial length, IOL power is IOL power, is Effective lens position (ELP), DPostRx is Desired refraction, and V is Vertex distance.
All the variables other than ELP can be measured directly. However, since ELP cannot be measured directly, some amount of regression is also used in these formulae to estimate ELP. ELP may be estimated using a number of variables. Vergence formulae may be subclassified into 2variable, 3variable, 5variable, and 7variable formulae depending on the number of variables used to calculate ELP.
Artificial intelligencebased formulae
These formulae do use a form of regression, but they rely on huge databases and employ artificial intelligencebased complex statistical models to arrive identify relationships between variables.
Ray tracing
Formulae that are based on Gaussian optics make certain fallacious assumptions. For example, Gaussian optics assumes the presence of a single optical axis and that all the rays of interest make only very small angles to this axis. Thirdgeneration vergence formulae also assume that all the components of the ocular optical system are thin lenses. They consider the cornea to be a single surface with a uniform refractive index, assuming that the radii of curvature of anterior and posterior cornea bear a fixed ratio to each other in all individuals, which may not be true always. The IOL is also assumed to be a thin lens. Hence, phenomena like spherical aberrations cannot be explained by this model.
Ray tracing is a strategy to calculate the path that a light ray will travel when passed through an optical system. To describe the IOL position in this method, the radii of curvature of both anterior and posterior corneal surfaces, their asphericity, central IOL thickness, and refractive index of refraction are all used. Gaussian optics formulae rely on postoperative refraction to back calculate ELP. This approach is less accurate due to errors in postoperative refraction and incorrect IOL power labeling. Unlike Gaussian optics formulae, ray tracing formulae do not describe a fictitious ELP. The final IOL position is a true geometrical position described by the distance between the apex of the posterior surface of cornea and the apex of the anterior surface of the IOL (postoperative ACD). One advantage that ray tracing formulae have over vergence formulae is that postoperative ACD can be measured directly using PCI and compared with preoperative estimated ACD.
Another advantage that ray tracing formulae have oververgence formulae is their ability to predict IOL power more accurately in abnormally short or long eyes and in eyes that have undergone corneal refractive surgery.^{[28]}
The Olsen formula, Okulix, and PhacoOptics are examples of ray tracing methods to calculate IOL power.^{[27]}
Some of the modern IOL power calculation formulae are discussed in detail below.
Ladas Super Formula
This method of IOL power calculation was jointly developed by Dr. John G. Ladas, Albert Jun, AazimSiddiqui, and Uday Devgan. The points of agreement and disagreement between Hoffer Q, Holladay 1, Holladay 1 with WangKoch adjustment, Haigis, and SRKT formulae for various ranges of axial length and keratometry were identified. The ideal portions from four of the five formulae were used to create a super surface. This is a dynamic formula that is constantly being updated using inputs from surgeons worldwide.^{[29]}
Barrett universal 2
Graham D Barrett developed the Barrett Universal 2. It is based on a theoretical model eye in which ACD is related to axial length and keratometry.
The formula can be used unmodified in eyes of all axial lengths and for all IOL designs. Hence the term universal.
The formula uses five variables – the AL, keratometry, ACD, LT, and horizontal WTW corneal diameter to calculate the ELP. In addition, the lens factor or A constant of the IOL and the desired postoperative refraction should also be entered in the calculator.
Better results are obtained if data from optical biometers are used in the formula.
The formula predicts IOL power accurately in eyes with extremely long axial lengths and even in eyes where negative power IOLs are used. No adjustments are necessary even if the implantation of a meniscus lens is planned.^{[30],[31],[32]}
Holladay 2
Jack T Holladay designed the Holladay 2. It is a 7variable vergence formula. Axial length, average keratometry, horizontal WTW distance, refraction ACD, LT, and age are the variables used in this formula. It has been determined that the WTW plays a significant role in determining ELP, next only to AL and keratometry. According to Jack T Holladay, eyes can be classified into nine types [Table 3].
In 90% of eyes, there is no correlation between anterior segment size and axial length.^{[33]}
The Holladay IOL Consultant and Surgical Outcomes Assessment Program is available online at www.hicsoap.com. Personalization of IOL A constants leads to a better outcome.
Hillradial basis function calculator
Warren E Hill along with RBF Calculator Physician Team, HaagStreit Switzerland, and Mathworks jointly developed the HillRBF. The HillRBF Calculator is, strictly speaking, not a formula. It is rather a sophisticated algorithm for IOL power calculation that is based on a complex mathematical model that consists of an artificial neural network that uses RBFs as activation functions. It has the property of adaptive learninga method of pattern recognition and ability to perform tasks which are independent of previously known data. The HillRBF calculator can also organize and represent data on its own. It is also a dynamic formula that becomes more accurate in its predictions as more data is fed into it. It is also the only method of IOL power calculation which lets the surgeon about how accurate the predicted IOL power is likely to be by giving an inbounds or out of bounds statement.
The HillRBF Calculator has been optimized for the HaagStreit Lenstar in combination with the Alcon SN60WF biconvex IOL for powers from +30.00 D to +6.00 D and the Alcon MA60MA meniscus design IOL for powers from +5.00 D to −5.00 D.
Kane formula
Developed in September 2017 by Dr. Jack X Kane, with data from close to 30,000 cases, the Kane formula is a theoretical formula, that uses a combination of regression and artificial inetlligence to further refine its results. The power of cloud computing was harnessed in the development of this formula. AL, keratometry, CCT, ACD, LT, and patient gender are the variables used to calculate IOL power. A few clinical studies have shown that the formula is highly accurate.^{[34],[35],[36]}
Olsen formula
Developed by Dr Thomas Olsen, the Olsen formula uses both paraxial and ray tracing optics. A regression method is used to predict the postoperative ACD. ACD and LT are used to determine the ELP. IOL position is described as a fraction of the capsular bag size using a new constant called the C constant. ACD, AL, LT, and keratometry are the variables that need to be entered in this formula.^{[37]}
Okulix
Okulix is a ray tracing formula. Since all optical components of the eye are not considered thin lenses, the radii of curvature of anterior and posterior corneal surfaces need to measured using a corneal topographer. The IOL is also described by the radii of curvature of its anterior and posterior surfaces, thickness, and refractive index.
PhacoOptics
PhacoOptics is also a software that relies on ray tracing to calculate IOL power. It also uses the concept of the Olsen's C constant.
Wang–Koch modification
IOL power calculation using traditional IOL formulae for abnormally long eyes many times leads to postoperative residual hyperopia. A modification to these formulae was suggested by Li Wang and Doug Koch for eyes with AL more than 25.2 mm, to avoid refractive surprise [Table 4].^{[38]}
FullMonte intraocular lens
FullMonte IOL is a software that uses a method of analysis called the Markov chain Monte Carlo process. A probability instead of a single emmetropic power is displayed at the end of this process. The surgeon can then choose the appropriate IOL power. The software evolves continuously optimizing itself as new data are received. Ultrasound biomicroscopy has enabled us to calculate sulcustosulcus width and sulcustosulcus perpendicular depth. These are variables which can be used by FullMonte IOL to predict IOL power.
UniversIOL calculator
Dr. Samir Sayegh designed the online calculator called the UniversIOL calculator. Instead of proposing a new IOL power calculation formula, the surgeon is provided with a choice of IOL power calculation formulae or combinations of formulae, a choice of computational methods, and a choice of IOL ranking criteria.
Toric IOL calculators
Some of the popular toric IOL calculators available are Assort toric calculator, Barrett toric calculator, Holladay IOL Consultant ToricPreOp Planner, Alcon online toric calculator, AMO easy toric IOL calculator, Care Group toric IOL calculator, and Appasamy Associates toric calculator. All of them are available online, and some of them like the Barrett Toric calculator are also available onboard popular biometers. A few of them have been discussed in detail.
Assort toric calculator
It is an online calculator that can be used to calculate spherical equivalent and toricity using the SRK/T, Holladay, Hoffer Q, or Haigis formulae. It uses a new parameter called Corneal topographic astigmatism (CorT Total), which takes into consideration posterior corneal astigmatism as well.
The calculator also suggests remedies in the form of degrees of IOL rotation/IOL exchange in the event of a postoperative refractive surprise.^{[39]}
Barrett toric calculator
It is a toric calculator that is available both online and on board many popular optical biometers. It uses the Barrett Universal 2 to calculate spherical equivalent. Posterior corneal toricity is determined using a theoretical model. Vector calculations are utilized to arrive at final IOL toricity. It also displays the postoperative spherocylindrical refraction that can be expected after implanting IOL of a specific toricity. The calculator has been optimized for the Haag StreitLenstar optical biometer.^{[39]}
Verion
The Verion [Figure 11] from Alcon laboratories is a tool for seamless IOL power calculation, surgical planning, and intraoperative guidance. It has three components: the Verion Reference Unit, the Verion Planner, and the Verion Digital Marker.
The Verion Reference Unit measures keratometry and pupil size and captures a highresolution image of the eye. Anatomical landmarks such as limbus, scleral vessels, iris, and pupil features are detected and used for registration and intraoperative tracking.
Data from the Verion Reference Unit is transferred to the Verion Planner. The Verion Planner is aplatform for surgical planning. It incorporates all popular IOL power calculation formulae including Barrett Universal 2 and Barrett Toric Calculator. Axial length, however, has to be calculated using a biometer and fed in.
Data from the Verion Planner is fed into the Verion Digital Marker, it creates an intraoperative digital overlay that can be viewed by the surgeon in real time by displaying it through the oculars of the operating microscope. It displays site of incisions, axis of IOL alignment, and also a capsulorhexis guide. Using the previously described anatomical data, the Verion Digital Marker automatically corrects for static and dynamic cyclotorsion, thus precluding the need for preoperative marking.
Callisto eye
The Callisto eye [Figure 12] is a tool from Carl Zeiss that, like the Verion assists in markerless toric IOL implantation. It uses data and images captured by the IOL Master 500/700 for registration and displays an overlay through the oculars of the operating microscope that assists the surgeon in making incisions on the right axis, creating the rightsized capsulorrhexis, markerless alignment of the toric IOL, and also in making limbal relaxing incisions.
Astigmatismfix.com
This is a website developed by John Berdahl and David Hardten. It features a toric results analyzer tool which in cases of a postoperative refractive surprise after toric IOL implantation, predicts whether IOL rotation will reduce postoperative astigmatism and if yes by how many degrees in which direction.
Intraocular lens power calculation in eyes postcorneal refractive surgery
The standard methods of IOL power calculation are inadequate in eyes that have undergone corneal refractive surgery. This is because of many factors. Corneal laser refractive surgery alters the anterior corneal curvature alone. Standard keratometers assume a fixed ratio between anterior and posterior corneal radii of curvature. Since this is altered after corneal refractive surgery, it induces error into measurement of corneal power and hence accurate IOL power calculation. This problem is compounded by the fact that modern IOL power calculation formulae also use corneal power to predict ELP. Radial keratotomy on the other hand flattens both anterior and posterior corneal surfaces. However, the effective optic zone diameter is much smaller than that of standard keratometry. Hence, standard keratometers tend to overestimate corneal power. Furthermore, corneal asphericity is altered after corneal refractive surgery. Corneal asphericity also plays a role in calculation of IOL power.^{[40]}
There are a number of methods that can be used for overcoming this difficulty. A few of them are discussed below.
HaigisL formula
The standard Haigis formula is modified n the following manner to obtain the HaigisL formula.
The corneal radius of curvature (r corr) is modified as follows:
where r meas is the measured corneal radius of curvature.^{[41]}
Shammas formula
Shammas described a formula for correction of the keratometric values in post corneal refractive surgery eyes.
Calculated corneal power, K = 1.14 ×TK −6.8
where TK is the postLASIK corneal topography central K.^{[42]}
Masket method
Samuel Masket developed this regression formula. For eyes with AL >23 mm, the Holladay 1 formula is used to calculate IOL power and for eyes with AL <23 mm, the Hoffer Q formula is used to calculate IOL power. IOL power is adjusted in the following manner.
(LSE × −0.326) +0.101 = PostLASIK IOL power adjustment
Where LSE is the laser corrected spherical equivalent adjusted for vertex distance.^{[41]}
Modified Masket method
The Masket method was modified by Warren Hill as follows:
(LSE × −0.4385) +0.0295 = PostLASIK IOL power adjustment.^{[41]}
Aphakic refraction
This method was described by Mackool et al. One hour after cataract extraction, an aphakic refraction is performed. IOL power is calculated in the following manner.^{[43]}
IOL power (D) = Aphakic refraction × 1.75
This method was found to be more accurate when anterior chamber IOLs were implanted.^{[41]}
Ianchulev and Leccisotti described another formula using a similar approach.
IOL power (D) =0.07x ^{2} + 1.27x + 1.22, where x = aphakic refraction
The Mackool method was found to be more accurate when anterior chamber IOLs were implanted, whereas this approach was found to be more accurate when the IOL was placed posteriorly.^{[41],[43]}
However, both these approaches are cumbersome.
Intraoperative aberrometry
The use of intraoperative aberrometers such as the ORA and Holos can lead to a more accurate IOL power prediction when compared to standard formulae in eyes postcorneal refractive surgery.^{[41]}
Ray tracing
Methods such as Okulix and PhacoOptics which use ray tracing techniques can predict IOL power more accurately when compared to Gaussian optics formulae in eyes that have undergone corneal refractive surgery.^{[41]}
Many webbased tools are available that aim at simplifying IOL power calculation in eyes postcorneal refractive surgery.
ASCRS postrefractive calculator
The ASCRS Postrefractive calculator (www.iolcalc.ascrs.org) enables the surgeon to make use of several available formulae including the Barrett TrueK formula in order to calculate IOL power in eyes postcorneal refractive surgery. The IOL power calculated using the ASCRS calculator is reasonably accurate.^{[41]}
Hoffer–Savini LASIK intraocular lens power tool
This is a spreadsheet that can be downloaded from the web address www.iolpowerclub.org/postsurgicaliolcalc. Once biometric data are entered into the spreadsheet, the tool provides modified biometric parameters. These may either be used in any of the popular IOL calculation formulae or the tool itself can give IOL power using various formulae that are available.^{[41]}
Barrett trueK formula
This formula is provided by the Asia Pacific Association of Cataract and Refractive Surgeons (www.apacrs.org).^{[44]}
The McCarthy post refractive intraocular lens calculator
McCarthy et al. studied the refractive outcomes of biometry performed on 173 eyes that previously underwent LASIK or PRK to design the McCarthy Post Refractive IOL Calculator (www.mccarthyeye.com/postrefractiveiolcalculator).^{[41],[45]}
Financial support and sponsorship
Nil.
Conflicts of interest
There are no conflicts of interest.
References   
1.  Apple DJ, Sims J. Harold ridley and the invention of the intraocular lens. Surv Ophthalmol 1996;40:27992. 
2.  Drexler W, Findl O, Menapace R, Rainer G, Vass C, Hitzenberger CK, et al. Partial coherence interferometry: A novel approach to biometry in cataract surgery. Am J Ophthalmol 1998;126:52434. 
3.  Eleftheriadis H. IOLMaster biometry: Refractive results of 100 consecutive cases. Br J Ophthalmol 2003;87:9603. 
4.  Kunavisarut P, Poopattanakul P, Intarated C, Pathanapitoon K. Accuracy and reliability of IOL master and Ascan immersion biometry in silico ne oilfilled eyes. Eye (Lond) 2012;26:13448. 
5.  Ghoraba HH, ElDorghamy AA, Atia AF, Ismail Yassin AelA. The problems of biometry in combined silicone oil removal and cataract extraction: A clinical trial. Retina 2002;22:58996. 
6.  Nakhli FR. Comparison of optical biometry and applanation ultrasound measurements of the axial length of the eye. Saudi J Ophthalmol 2014;28:28791. 
7.  Shah M, Shah S, Shah K, Patel P. Biometry for IOL power calculation, which technology is better optical or acoustic? Sudan J Ophthalmol 2014;6:69. 
8.  
9.  Astbury N, Ramamurthy B. How to avoid mistakes in biometry. Community Eye Health 2006;19:701. 
10.  Sheard R. Optimising biometry for best outcomes in cataract surgery. Eye (Lond) 2014;28:11825. 
11.  Hoffmann PC, Hütz WW, Eckhardt HB, Heuring AH. Intraocular lens calculation and ultrasound biometry: Immersion and contact procedures. Klin Monbl Augenheilkd 1998;213:1615. 
12.  Olsen T. Calculation of intraocular lens power: A review. Acta Ophthalmol Scand 2007;85:47285. 
13.  McAlinden C, Wang Q, Gao R, Zhao W, Yu A, Li Y, et al. Axial length measurement failure rates with biometers using sweptsource optical coherence tomography compared to partialcoherence interferometry and optical lowcoherence interferometry. Am J Ophthalmol 2017;173:649. 
14.  Findl O, Drexler W, Menapace R, Kiss B, Hitzenberger CK, Fercher AF. Optical biometry in cataract surgery. Mod Cataract Surg 2002;34:13140. Available from: https://www.karger.com/Article/FullText/60792. [Last accessed on 2018 Apr 13]. 
15.  Schmid GF. Axial and peripheral eye length measured with optical low coherence reflectometry. J Biomed Opt 2003;8:65562. 
16.  Srivannaboon S, Chirapapaisan C, Chonpimai P, Loket S. Clinical comparison of a new sweptsource optical coherence tomographybased optical biometer and a timedomain optical coherence tomographybased optical biometer. J Cataract Refract Surg 2015;41:222432. 
17.  Leitgeb R, Hitzenberger C, Fercher A. Performance of fourier domain vs. time domain optical coherence tomography. Opt Express 2003;11:88994. 
18.  Hill W, Angeles R, Otani T. Evaluation of a new IOLMaster algorithm to measure axial length. J Cataract Refract Surg 2008;34:9204. 
19.  Akman A, Asena L, Güngör SG. Evaluation and comparison of the new swept source OCTbased IOLMaster 700 with the IOLMaster 500. Br J Ophthalmol 2016;100:12015. 
20.  Epitropoulos A. Axial length measurement acquisition rates of two optical biometers in cataractous eyes. Clin Ophthalmol 2014;8:136976. 
21.  Aktas S, Aktas H, Tetikoglu M, Sagdk HM, Özcura F. Refractive results using a new optical biometry device: Comparison with ultrasound biometry data. Medicine (Baltimore) 2015;94:e2169. 
22.  Mandal P, Berrow EJ, Naroo SA, Wolffsohn JS, Uthoff D, Holland D, et al. Validity and repeatability of the Aladdin ocular biometer. Br J Ophthalmol 2014;98:2568. 
23.  Melike O, Totuk G, Aykan U. Repeatability of the new swept source optical biometer IOLmaster®700 measurements. EC Ophthalmol 2017;7:7885. 
24.  Kurian M, Negalur N, Das S, Puttaiah NK, Haria D, Tejal SJ, et al. Biometry with a new sweptsource optical coherence tomography biometer: Repeatability and agreement with an optical lowcoherence reflectometry device. J Cataract Refract Surg 2016;42:57781. 
25.  Tityal JS, Kaur M, Falera R, Sahay P. Intraoperative aberrometry – Assisted intraocular lens exchange in postrefractive surgery intraocular lens surprise. JCRS Online Case Rep 2018;6:124. 
26.  
27.  Koch DD, Hill W, Abulafia A, Wang L. Pursuing perfection in intraocular lens calculations: I. Logical approach for classifying IOL calculation formulas. J Cataract Refract Surg 2017;43:7178. 
28.  Saiki M, Negishi K, Kato N, Torii H, Dogru M, Tsubota K. Ray tracing software for intraocular lens power calculation after corneal excimer laser surgery. Jpn J Ophthalmol 2014;58:27681. 
29.  Ladas JG, Siddiqui AA, Devgan U, Jun AS. A 3D “Super surface” combining modern intraocular lens formulas to generate a “Super formula” and maximize accuracy. JAMA Ophthalmol 2015;133:14316. 
30.  Barrett GD. An improved universal theoretical formula for intraocular lens power prediction. J Cataract Refract Surg 1993;19:71320. 
31.  Zhang Y, Liang XY, Liu S, Lee JWY, Bhaskar S, Lam DSC. Accuracy of Intraocular Lens Power Calculation Formulas for Highly Myopic Eyes. J Ophthalmol. 2016;2016:1917268. 
32.  Roberts TV, Hodge C, Sutton G, Lawless M, contributors to the Vision Eye Institute IOL outcomes registry. Comparison of hillradial basis function, barrett universal and current third generation formulas for the calculation of intraocular lens power during cataract surgery. Clin Exp Ophthalmol 2018;46:2406. 
33.  Holladay JT. Standardizing constants for ultrasonic biometry, keratometry, and intraocular lens power calculations. J Cataract Refract Surg 1997;23:135670. 
34.  Connell BJ, Kane Jx. Comparison of the kane formula with existing formulas for intraocular lens power selection. BMJ Open Ophthalmol 2019;4:e000251. 
35.  Melles RB, Kane JX, Olsen T, Chang WJ. Update on intraocular lens calculation formulas. Ophthalmology 2019;126:13345. 
36.  Darcy K, Gunn D, Tavassoli S, Sparrow J, Kane JX. Assessment of the accuracy of new and updated IOL power calculation formulas in 10930 eyes from the UK national health service. J Cataract Refract Surg [In Press]. Available from: https://doi.org/10.1016/j.jcrs. 2019.08.014. [Last accessed on 2019 Sep 29]. 
37.  Olsen T, Hoffmann P. C constant: New concept for ray tracingassisted intraocular lens power calculation. J Cataract Refract Surg 2014;40:76473. 
38.  Wang L, Shirayama M, Ma XJ, Kohnen T, Koch DD. Optimizing intraocular lens power calculations in eyes with axial lengths above 25.0 mm. J Cataract Refract Surg 2011;37:201827. 
39.  
40.  Savini G, Hoffer KJ, Barboni P. Influence of corneal asphericity on the refractive outcome of intraocular lens implantation in cataract surgery. J Cataract Refract Surg 2015;41:7859. 
41.  Hodge C, McAlinden C, Lawless M, Chan C, Sutton G, Martin A, et al. Intraocular lens power calculation following laser refractive surgery. Eye Vis (Lond) 2015;2:7. 
42.  Shammas HJ, Shammas MC, Garabet A, Kim JH, Shammas A, LaBree L. Correcting the corneal power measurements for intraocular lens power calculations after myopic laser in situ keratomileusis. Am J Ophthalmol 2003;136:42632. 
43.  Mackool RJ, Ko W, Mackool R. Intraocular lens power calculation after laser in situ keratomileusis: Aphakic refraction technique. J Cataract Refract Surg. 2006 Mar;32(3):435–7. 
44.  Abulafia A, Hill WE, Koch DD, Wang L, Barrett GD. Accuracy of the barrett trueK formula for intraocular lens power prediction after laser in situ keratomileusis or photorefractive keratectomy for Myopia. J Cataract Refract Surg 2016;42:3639. 
45.  McCarthy M, Gavanski GM, Paton KE, Holland SP. Intraocular lens power calculations after myopic laser refractive surgery: A comparison of methods in 173 eyes. Ophthalmology 2011;118:9404. 
[Figure 1], [Figure 2], [Figure 3], [Figure 4], [Figure 5], [Figure 6], [Figure 7], [Figure 8], [Figure 9], [Figure 10], [Figure 11], [Figure 12]
[Table 1], [Table 2], [Table 3], [Table 4]
